Recent changes
Jump to navigation
Jump to search
Track the most recent changes to the wiki on this page.
List of abbreviations:
- N
- This edit created a new page (also see list of new pages)
- m
- This is a minor edit
- b
- This edit was performed by a bot
- (±123)
- The page size changed by this number of bytes
14 May 2024
|
m 13:57 | Vehicles for Moving Pinball Machines 3 changes history +14 [ForceFlow (3×)] | |||
m |
|
13:57 (cur | prev) +7 ForceFlow talk contribs →Subaru | |||
m |
|
13:56 (cur | prev) +7 ForceFlow talk contribs →Subaru | |||
m |
|
13:54 (cur | prev) 0 ForceFlow talk contribs →Kia: formatting |
13 May 2024
|
18:14 | Williams WPC 2 changes history +61 [Chibler (2×)] | |||
|
18:14 (cur | prev) +65 Chibler talk contribs →Check fuses F114 and F115 message | ||||
|
18:11 (cur | prev) -4 Chibler talk contribs →Check fuses F114 and F115 message |
05:09 | Jersey Jack Repair Guides diffhist +66 Umbachje talk contribs →Dialed In |
03:29 | Vehicles for Moving Pinball Machines diffhist +71 Crb1971 talk contribs →Kia: added Telluride |
12 May 2024
21:32 | Bally 6803 diffhist +81 ForceFlow talk contribs →Repair Logs: formatting - This section probably needs to be written to be incorporated into the board repair section |
10 May 2024
|
15:59 | Bally 6803 4 changes history +648 [Pb123 (4×)] | |||
|
15:59 (cur | prev) +11 Pb123 talk contribs →= | ||||
|
01:43 (cur | prev) +39 Pb123 talk contribs →= | ||||
|
01:42 (cur | prev) +102 Pb123 talk contribs →Repair Logs | ||||
m |
|
01:29 (cur | prev) +496 Pb123 talk contribs →Repair Logs |
|
01:41 | (Upload log) [Pb123 (2×)] | |||
|
01:41 Pb123 talk contribs uploaded a new version of File:Bally 6803 PSU R3 R4 closeup for EzSBC mod.jpg (This shows the modifications needed to replace the 78H05C VRM with the new EzSBC 5V VRM. No heat sink is required for this new VRM. R4 and R3 are removed. R3 is replaced by a jumper wire, in this case a 22ga wire was used (in blue, to the right of the black capacitor).) | ||||
|
01:37 Pb123 talk contribs uploaded File:Bally 6803 PSU R3 R4 closeup for EzSBC mod.jpg (This shows a closeup of the modifications needed for replacement of the 78H05C with a new switching VRM, EzSBC. R4 and R3 are cut out. R3 is replaced with a jumper, 22ga wire.) |