Star Wars (Stern)

From PinWiki
Jump to navigation Jump to search

1 General Information

Star Wars was released by Stern in 2017. It was manufactured in 3 models:

  • Pro Edition
  • Premium Edition
  • Limited Edition

For more info, refer to the Star Wars page on Stern's website.

2 Software

2.1 Code Updates

The most recent code released for Star Wars is version 1.05.0 dated 10/12/2018. It can be downloaded from the following links:

2.2 SD Card Images

Stern also provides SD card images to re-create, if needed, the software on the SD card inserted into the CPU Node 0 board in the game. The 1.05.0 SD card images can be downloaded from the following links:

The instructions on how to re-create an SD card from these images can be found here.

3 Hardware

3.1 Switches, Lights, Coils, Etc.

The manuals do a good job of listing the individual switches, lights, coils (drivers), and motors used in the manual and cross-referencing the controlling node board and pin-outs, and associated part number. Refer to section 3 in the manuals for this detailed info.

3.2 Node Boards

The following node and sub-node boards are used in this game:

Node ID Description Part # Location Notes
Node 0 SPIKE 2 CPU node board 520-1003-01 Backbox Replaced by 520-7014-00A
Node 1 Cabinet node board 520-6967-72 Cabinet
Node 8 Playfield 48V Core-Driver node board 520-7017-72 Lower Playfield
8a Trough serial opto receiver extension board 520-7001-00A Playfield
8b Mode small LED board 520-7042-00 Playfield
8c Mode small LED board 520-7042-00 Playfield
8d Mode small LED board 520-7042-00 Playfield
8e Mode small LED board 520-7042-00 Playfield
8f Five bank LED board 520-7043-00 Playfield
Node 9 Playfield 48V Core-Driver node board 520-7017-72 Playfield
9a Right eject LED board 520-7053-00 Playfield
9b Right ramp LED board 520-7054-00 Playfield
9c Serial 16 LED board 520-6831-01B Playfield
9d Right motor driver board 520-6996-00A Playfield Prem/LE only
Node 10 SPI only node board 520-6976-72 Playfield
10a Main LED board 520-7052-00 Playfield
Node 11 Playfield 48V 4-driver node board 520-6998-72C Back Panel Prem/LE only

The following connections are used to link the node boards:

t.b.s.

The manuals do a good job of showing the pinouts for each of the node and sub-node boards and what they connect to (i.e., switches, lamps, coils, motors, etc.). Refer to section 4 in the manual for details.

3.3 Rubber Rings

Refer to section "Playfield Rubber Parts" in section 5 of the manual for details.

4 Paperwork

4.1 Manuals

Manuals can be found on Stern's website:

4.2 Schematics

Schematics are not contained in the manuals. Stern has published some schematics for the node boards used in the game. Refer to the above "Node Boards" section for access to the schematics that are available.