Difference between revisions of "The Addams Family"

From PinWiki
Jump to navigation Jump to search
m
Line 19: Line 19:
  
 
===The Power magnets===
 
===The Power magnets===
If the driver transistors fails and shorts on, these magnets may get turned on all the time and burn the playfield.  Make sure the correct fuses are fitted.
+
If any magnet driver transistor fails and shorts on, these magnets may get turned on all the time and burn the playfield.  Make sure the correct fuses are fitted.
  
 
The driver transistors for the magnets are located at the left underside of the playfield on the Hi-Powered P.C.B. The solenoid wiring diagram on page 3-9 is incorrect. It shows the Hi-Powered P.C.B. connected to the J107 side of the diagram. It is actually connected to J126 for upper and right magnet and J127 for the left magnet. Each magnet is energized by its associated TIP36C via its driver board transistor, TIP102, Q44 for the left magnet, Q32 for the right magnet and Q34 for the upper magnet.
 
The driver transistors for the magnets are located at the left underside of the playfield on the Hi-Powered P.C.B. The solenoid wiring diagram on page 3-9 is incorrect. It shows the Hi-Powered P.C.B. connected to the J107 side of the diagram. It is actually connected to J126 for upper and right magnet and J127 for the left magnet. Each magnet is energized by its associated TIP36C via its driver board transistor, TIP102, Q44 for the left magnet, Q32 for the right magnet and Q34 for the upper magnet.

Revision as of 07:30, 10 October 2013

ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.


Manufacturer System Year Model Produced
Bally WPC-DND 1992 20017 20,270

The Addams Family Playing Tips and Rule Sheet

The Addams Family Shop Guide

IPDB Link (including software and schematics)

1 WPC Specific Issues

See WPC Specific Issues

2 Game-Specific Issues

2.1 The Power magnets

If any magnet driver transistor fails and shorts on, these magnets may get turned on all the time and burn the playfield. Make sure the correct fuses are fitted.

The driver transistors for the magnets are located at the left underside of the playfield on the Hi-Powered P.C.B. The solenoid wiring diagram on page 3-9 is incorrect. It shows the Hi-Powered P.C.B. connected to the J107 side of the diagram. It is actually connected to J126 for upper and right magnet and J127 for the left magnet. Each magnet is energized by its associated TIP36C via its driver board transistor, TIP102, Q44 for the left magnet, Q32 for the right magnet and Q34 for the upper magnet.